AWS S3 Glacier Storage Pricing: Costs Explained Amazon S3 Glacier gives you low-cost object storage for data you rarely touch. But the headline per-GB rate is only one line on the bill. Retrieval fees, request charges, minimum storage durations, and data transfer can all change the total.

Pricing shifts with the storage class, AWS Region, object count, access frequency, retrieval speed, retention period, and download path. This guide compares the three Glacier classes, breaks down each charge, flags the hidden ones, and shows how to build a realistic US-dollar budget.

All prices below are public on-demand rates for US East (N. Virginia), as of November 18, 2026. Check the official AWS S3 pricing page before you commit, since rates vary by Region and can change.

Key Takeaways

  • S3 Glacier has three classes with different rates; none is "the" price.
  • The cheapest class per GB can cost more once retrievals, restore delays, and early deletion are counted.
  • Deep Archive fits planned, rare access; Instant Retrieval fits data you still need in milliseconds.
  • A real estimate needs volume, object count, requests, retrieval volume, transfer, and Region.

How Much Does AWS S3 Glacier Storage Cost? (Pricing Overview)

S3 Glacier is a family of three Amazon S3 storage classes, not a single product. A storage-only price tells you the cost of keeping bytes on disk. An all-in estimate adds everything that happens to those bytes: uploads, transitions, restores, and downloads.

Current S3 Glacier Storage Pricing

Class Storage per GB-month Access and typical retrieval time Minimum duration Minimum billable object size
Glacier Instant Retrieval $0.004 Direct GET; milliseconds 90 days 128 KB
Glacier Flexible Retrieval $0.0036 Restore, then GET; Expedited 1-5 minutes, Standard 3-5 hours, Bulk 5-12 hours 90 days None; 40 KB metadata per object
Glacier Deep Archive $0.00099 Restore, then GET; Standard within 12 hours, Bulk within 48 hours 180 days None; 40 KB metadata per object
S3 Standard (comparison) $0.023 Direct GET; milliseconds None None

For Flexible and Deep Archive, the 40 KB of metadata splits into 8 KB billed at S3 Standard rates and 32 KB billed at the archive rate. Restore times are typical, not guarantees. Expedited retrievals depend on demand, so AWS recommends provisioned capacity if you need predictability.

How Much Does 1 TB Cost to Store?

AWS bills in binary units. Its 1 TB is 1,024 billed GB (a TiB), not the decimal 1,000 GB many vendors use. The storage-only math for one month:

Class Calculation Monthly cost
Instant Retrieval 1,024 x $0.004 $4.10
Flexible Retrieval 1,024 x $0.0036 $3.69
Deep Archive 1,024 x $0.00099 $1.01
S3 Standard 1,024 x $0.023 $23.55

These figures exclude metadata, minimum-size uplift, requests, retrieval, restored copies, transfer, replication, taxes, and early-deletion charges.

Who Should Expect Lower or Higher Costs?

Long-term, rarely read data lands in the cheapest tier. Think regulatory records, disaster-recovery archives, and backup repositories that you restore on a schedule.

Higher rates make sense when data must be available without a restore workflow. Media masters that editors pull up quarterly, or medical and research datasets that analysts query on short notice, often belong in Instant Retrieval.

What Makes Up the Cost of AWS S3 Glacier?

The bill is shaped by technical, operational, and business choices. The advertised storage rate is just the starting point.

Storage Charges

AWS bills the average amount of data stored over the month. The class you choose sets the per-GB rate, and retention length sets how many months you pay it.

Model growth, too. If you add 5 TB every month, pricing only the starting archive understates year-one spend considerably.

Requests and Lifecycle Transition Charges

Per 1,000 requests, US East:

Class PUT/COPY/POST LIST GET Lifecycle transition in
Instant $0.02 $0.005 $0.01 $0.02
Flexible $0.03 $0.005 $0.0004 $0.03
Deep Archive $0.05 $0.005 $0.0004 $0.05

Object count matters more than volume here. Moving one million objects costs $20 into Instant, $30 into Flexible, and $50 into Deep Archive, whether those objects total 1 GB or 1 PB.

S3 Glacier request charges by storage class and object count

Retrieval and Restore Costs

Instant Retrieval works like regular S3: you GET the object directly. Flexible and Deep Archive require a restore first, which creates a temporary copy you then download.

Class / tier Retrieval per GB Restore requests per 1,000
Instant (direct) $0.03 n/a
Flexible, Expedited $0.03 $10.00
Flexible, Standard $0.01 $0.05
Flexible, Bulk $0 $0
Deep Archive, Standard $0.02 $0.10
Deep Archive, Bulk $0.0025 $0.025

The restored copy is billed separately at S3 Standard rates for as long as you keep it available. The archived original keeps accruing its own storage charge too.

Data Transfer and Download Costs

Price downloads separately from retrieval. Internet transfer out in US East is free for the first 100 GB per month (shared across AWS services), then $0.09/GB for the next 10 TB, dropping to $0.085, $0.07, and $0.05 at higher tiers.

Some paths cost nothing: internet ingress, same-Region S3-to-S3 copies, S3 to AWS services in the same Region, and S3 to CloudFront. Cross-Region moves vary by pair, such as $0.02/GB from us-east-1 to Ireland or $0.01/GB to Ohio.

Minimum Duration, Object Size, and Metadata

Delete, overwrite, or transition an object before its minimum (90 days for Instant and Flexible, 180 for Deep Archive) and you pay a prorated charge for the remaining days.

Small objects hurt, too:

  • Instant bills anything under 128 KB as 128 KB
  • Flexible and Deep Archive add 40 KB of metadata to every object
  • Since September 2024, lifecycle rules by default skip objects under 128 KB

Millions of tiny files can make a cheap archive far less cheap.

Region, Replication, and Management Features

Region changes prices. Tokyo charges $0.005, $0.0045, and $0.002 per GB-month for Instant, Flexible, and Deep Archive, against $0.004, $0.0036, and $0.00099 in N. Virginia. Don't assume US rates apply elsewhere.

AWS Glacier storage prices comparing Tokyo and US East regions

Optional features add up at scale:

  • Cross-Region replication: second copy's storage, replication PUTs, and inter-Region transfer
  • S3 Inventory: $0.0025 per million objects listed
  • Storage Lens advanced metrics: $0.20 per million objects per month for the first 25 billion
  • Batch Operations: $0.25 per job plus $1 per million objects
  • Object tagging: $0.0065 per 10,000 tags per month

Low-Cost vs Higher-Cost Glacier Options: What's the Difference and How Do You Estimate the Right Budget?

The choice is a trade-off among storage price, retrieval speed, recovery requirements, and per-object costs. Storage rate alone does not determine what you will spend.

Glacier Deep Archive vs Flexible Retrieval vs Instant Retrieval

Factor Instant Flexible Deep Archive
Storage per GB-month $0.004 $0.0036 $0.00099
Access Milliseconds Minutes to hours Hours
Restore needed No Yes Yes
Minimum duration 90 days 90 days 180 days
AWS access guidance About once per quarter 1-2 times per year Less than once per year

Deep Archive only fits when multi-hour waits are acceptable. Flexible Retrieval is better for planned restores where minutes to hours of delay are fine. Choose Instant Retrieval when the archive still needs immediate access.

Performance, Reliability, and Recovery Trade-offs

All three classes are designed for 99.999999999% durability across at least three Availability Zones. They differ in access and availability: AWS's storage class guidance lists a 99% availability SLA for Instant and 99.9% for Flexible and Deep Archive.

A low storage rate can backfire. A team facing an urgent recovery may need Expedited retrieval at $0.03/GB plus $10 per 1,000 requests, or may have to wait hours it can't spare. Confirm current durability and availability terms in AWS documentation instead of treating the classes as interchangeable.

Estimating a Monthly Storage Budget

  1. Start with average GB stored, including projected monthly growth
  2. Multiply by the per-GB-month rate for your Glacier class and Region
  3. Add metadata or 128 KB minimum billable-object uplift from object count
  4. Add PUT and lifecycle transition request charges (objects / 1,000 x rate)
  5. Fold in management and replication charges if you use those features
  6. Estimate how much of the archive you will access, and price retrieval separately

Six-step AWS S3 Glacier monthly storage budget estimation workflow

Estimating a Recovery or Download Event

Formula: GB retrieved x retrieval rate, plus restore requests, plus temporary Standard storage, plus GETs, plus transfer out.

Example assumptions: Flexible Retrieval, us-east-1, 10,240 GB across 10,000 objects, one restore request and one GET per object, copies kept 7 days in a 30-day month, transfer to an AWS service in the same Region.

Input Bulk Standard
Typical restore time 5-12 hours 3-5 hours
Retrieval + restore requests $0 $102.90
Temporary Standard storage (10,240 x $0.023 x 7/30) $54.95 $54.95
GET requests (10 x $0.0004) $0.004 $0.004
Same-Region transfer $0 $0
Total About $54.95 About $157.85

Flexible Retrieval Bulk versus Standard recovery cost comparison

The Bulk "free" retrieval still carries restored-copy storage. Archived-object storage continues on top.

When Spending More or Less Makes Sense

Pay more for Instant Retrieval or faster Flexible tiers when your recovery-time objective demands it. Choose Deep Archive and Bulk retrieval for planned compliance or backup restores. Validate any estimate with the AWS Pricing Calculator and the official S3 pricing page before migrating production data.

What Most People Miss When It Comes to AWS S3 Glacier Cost

Most budgets fixate on the per-GB rate and skip retrieval events, minimum-duration charges, restored copies, and internet egress.

Other quiet leaks:

  • Incomplete multipart uploads leave Flexible and Deep Archive parts at S3 Standard rates until completed; normal expiration rules don't remove them, so add an AbortIncompleteMultipartUpload action
  • Versioned objects bill every version in full; a normal delete only adds a delete marker
  • Small objects stack per-object transition fees on top of metadata overhead
  • Lifecycle rules can't exit a minimum-duration class early, and billing starts when the condition is met, not when the move finishes

Monitor archive growth and access patterns with Cost Explorer, Cost and Usage Reports, and S3 Storage Lens. Note that Storage Class Analysis only recommends Standard to Standard-IA, so it won't tell you when to move to Glacier.

For enterprises running S3 alongside AWS block storage, Lucidity offers real-time visibility and autonomous optimization for cloud block storage across AWS, Azure, and Google Cloud. It complements S3 Glacier cost controls rather than replacing them.

Conclusion

S3 Glacier pricing depends on storage class, access needs, retention duration, object structure, retrieval volume, and transfer path. The $0.00099 Deep Archive rate is real, but it's one input among many.

The right choice balances monthly savings against recovery speed, reliability, and the full lifecycle cost of storing and retrieving the data.

Frequently Asked Questions

How much does 1TB of storage cost on Amazon?

Storage-only for 1,024 billed GB in US East: about $1.01 (Deep Archive), $3.69 (Flexible), $4.10 (Instant), or $23.55 (S3 Standard) per month. Requests, retrieval, and transfer are extra.

How much does it cost to download data from S3?

It depends on storage class, volume restored, retrieval tier, destination, and Region. Glacier restore fees are separate from S3 transfer-out charges, which start at $0.09/GB after the free 100 GB.

Is AWS S3 free or paid?

S3 is paid and usage-based. New accounts created on or after July 15, 2025 can receive up to $200 in credits. Billable categories include storage, requests and retrieval, transfer, management, replication, and query.

What is Amazon S3 Glacier storage?

It's a set of S3 archive classes for infrequently accessed data. Instant Retrieval gives millisecond access, Flexible Retrieval needs a restore taking minutes to hours, and Deep Archive is cheapest with restores taking hours.

Is AWS Glacier discontinued?

The original standalone, vault-based Amazon Glacier service is closed to new customers, but existing data stays accessible. AWS directs users to the S3 Glacier storage classes, which remain current.