Azure NAT Gateway Pricing: Costs Explained Azure NAT Gateway is a managed service that gives resources in private Azure subnets outbound internet connectivity. The price looks simple on paper. In practice, it's hard to forecast, because the bill grows with every gigabyte your workloads pull down from the internet.

The total depends on the Azure region, gateway resource hours, data processed, traffic destination, public IP setup, and adjacent networking services. All rates below are USD list prices for the US (Central US scenarios), as of November 2026. Confirm them on Microsoft's pricing page before you budget.

This article covers the pricing formula, cost components, three workload scenarios, a budgeting method, common oversights, and ways to cut costs.

Key Takeaways

  • NAT Gateway bills a flat hourly resource charge plus a per-GB data processing charge.
  • Bandwidth, public IPs, monitoring, and neighboring services are billed separately.
  • StandardV2 adds zone redundancy at the same NAT price as Standard.
  • Idle gateways keep billing until you delete them.

How Much Does Azure NAT Gateway Cost? (Pricing Overview)

There's no single monthly price and no tier ladder. Your bill depends on how many gateways you provision and how much traffic flows through them.

Pricing components

Charge Billed unit US list price
Resource Each gateway-hour $0.045/hour
Data processing Each GB processed $0.045/GB
  • Standard and StandardV2 carry the same NAT Gateway price.
  • Hourly billing starts as soon as the resource is provisioned, and partial hours bill as full hours.
  • Microsoft's definition: all outbound data and inbound return traffic is charged per GB. Unsolicited inbound connections aren't permitted, so "inbound" here means responses to your outbound requests.

The formula: NAT cost = (gateways × hours × $0.045) + (GB processed × $0.045). Then add bandwidth, public IPs, and other services on top.

Azure NAT Gateway pricing formula and component charges

Typical monthly cost scenarios

These use Standard SKU, Central US, 730 hours per gateway, with GB counted in both directions. Volumes are illustrative, not benchmarks.

Scenario Gateways GB processed Resource Processing NAT-only total
Low-volume dev/test 1 100 $32.85 $4.50 $37.35
Standard production 1 1,000 $32.85 $45.00 $77.85
High-volume, multi-gateway 10 10,000 $328.50 $450.00 $778.50

Azure NAT Gateway monthly cost scenarios comparison chart

The first two come from the Azure pricing calculator; the third is ten of the production configuration added together.

Every figure excludes Azure internet egress, public IP addresses or prefixes, Azure Firewall, Private Link, and chargeable monitoring or logging. The calculator itself flags bandwidth as additional.

What Drives Azure NAT Gateway Pricing, and What Belongs in the Total Cost

Costs fall into three groups: direct NAT charges, traffic-related charges, and operational costs that show up elsewhere on the bill.

Resource hours

Hourly billing applies whether or not subnets or public IPs are attached. Zero traffic doesn't mean zero cost. Detaching a gateway isn't deleting it, so remove the resource itself to stop the charge.

Deleting a gateway also doesn't delete its public IP address or prefix. Those keep billing until you remove them.

Data processed and traffic volume

Download-heavy workloads drive the processing line. AKS clusters, for example, pull container images from Microsoft Container Registry, hit package repositories, and fetch Ubuntu security updates. When those flows cross the gateway, the downloaded responses count as processed data.

Other common culprits include:

  • Large file downloads
  • Content streaming
  • Frequent external API calls
  • Backup transfers

Region, destination, and network path

NAT processing doesn't replace bandwidth billing. They stack:

  • Internet outbound: Azure charges for transfer out of its datacenters in addition to NAT processing.
  • Internet return traffic: inbound transfer is free as bandwidth, but NAT still charges to process the response.
  • Same-region Azure services: no extra bandwidth charge.
  • Cross-region Azure services: outbound transfer is charged.

Azure NAT Gateway traffic destinations and stacked network charges

Service endpoints change the path. Matching service traffic takes a more specific route over the Azure backbone and needs no NAT device. Same-region Azure Storage connections don't use NAT public IPs at all.

Public IPs and adjacent services

  • Public IPs and prefixes: per-IP hourly charges. NAT uses the entire assigned prefix.
  • Azure Firewall: its own deployment-hour and data-processing meters.
  • Private Link: private endpoint hours plus inbound and outbound processing meters.
  • Azure Monitor: standard metrics are free, but log ingestion and retention aren't.

Lifecycle cost breakdown

Separate one-time deployment effort from recurring costs:

  • Gateway hours
  • Data processing
  • Bandwidth
  • Public IPs
  • Monitoring
  • Periodic architecture reviews

A lower NAT line can still raise the total. Rerouting traffic through Azure Firewall or Private Link adds its own per-GB meters, so the net result depends on the workload.

Low-Cost vs. High-Cost Setups, and How to Estimate the Right Budget

The cheapest configuration isn't automatically the best one. Weigh total cost against availability, security, performance, and operations.

Lower-cost configuration

For dev, staging, or low-volume workloads:

  • Share one gateway across several subnets in a VNet, avoiding duplicate hourly charges.
  • Delete idle gateways and leftover IPs.
  • Cut unnecessary external traffic.
  • Use service endpoints for eligible Azure services.

The trade-off: a Standard gateway is single-zone, so a zone failure hits every associated subnet.

Higher-cost configuration

Production may justify more IPs, private connectivity, inspection, and monitoring.

  • Zone resilience: Microsoft recommends StandardV2 to survive a single-zone failure, at the same NAT cost as Standard.
  • Connection-heavy apps: each public IP supplies 64,512 SNAT ports. Add IPs under pressure; the Well-Architected Framework treats SNAT exhaustion as an availability risk.

Gateway count, IP capacity, and zone resilience are three separate decisions. Production doesn't automatically mean multiple gateways.

How to calculate the right budget

  1. Count the gateways per environment.
  2. Estimate monthly GB processed, both directions.
  3. Identify traffic destinations: internet, same-region Azure, cross-region.
  4. Look up current US rates for NAT, bandwidth, and IPs.
  5. Add related services such as Firewall, Private Link, and logging.
  6. Add a contingency for traffic growth.

Six-step Azure NAT Gateway budgeting workflow

Model dev, staging, and production separately, and split workload classes too. Averaging everything into one number hides the real cost driver.

Validate against actual usage

  • Azure Cost Management: in Cost Analysis, filter Resource to the NAT Gateway and group by Meter to separate hourly and data charges.
  • Azure Monitor: open the NAT resource, select Bytes, Sum, and Direction = In and Out. Avoid Count aggregation.
  • Flow logs: Network Watcher VNet flow logs show which endpoints send and receive bytes. StandardV2 native NAT flow logs add $4/resource/month.

Azure NAT Gateway cost validation tools and metrics workflow

Cost Analysis measures charges; Bytes explains volume. After deployment, set budgets, tags, anomaly alerts, and owners so forgotten gateways and traffic spikes get caught.

What Most People Miss, and How to Reduce Azure NAT Gateway Costs

Teams fixate on the hourly price. At $32.85 a month per gateway, that figure is often the smaller number once traffic grows. In the production scenario, processing is $45 against $32.85 for the resource, before any bandwidth. Forgotten test gateways keep billing too.

To reduce spend:

  • Audit destinations and routing, then trim unnecessary external transfers.
  • Cache data that's read often and changes rarely, rather than fetching it repeatedly.
  • Evaluate service endpoints (no extra charge) and Private Link for eligible PaaS traffic; test net savings, since Private Link has its own meters.
  • Keep related resources in appropriate regions, after checking performance and security needs.

Governance matters as much as design. Use Cost Management, Azure Monitor, tagging, budgets, alerts, and cleanup policies on a recurring schedule.

If you're also reviewing block storage waste across clouds, Lucidity's AutoScaler automates storage expansion and shrinking from real-time demand on AWS, Azure, and Google Cloud. Lucidity reports storage cost cuts of up to 70%. It addresses storage, not NAT Gateway charges.

Conclusion

Azure NAT Gateway cost comes from two places: the gateways you provision and the volume and path of data flowing through them. Accurate budgets keep NAT charges separate from bandwidth, public IPs, security, private connectivity, and monitoring.

Before you finalize spend:

  • Verify current US rates
  • Model your traffic pattern
  • Compare the estimate with Cost Management data
  • Optimize only where savings don't weaken reliability or security

Frequently Asked Questions

How much does a NAT gateway cost in Azure?

It depends on gateway hours, data processed, region, traffic volume, and related bandwidth or public IP charges. The US list price is $0.045 per hour plus $0.045 per GB. Check Microsoft's pricing page and calculator for your estimate.

What are the main charges in Azure NAT Gateway pricing?

A recurring resource charge and a per-GB data processing charge. Bandwidth, public IPs, and other networking services are billed separately.

Does Azure NAT Gateway charge for data processed?

Yes. Microsoft bills all outbound data plus inbound return traffic per GB. Large downloads, API traffic, updates, and backups raise the bill.

Is Azure NAT Gateway billed when it is idle?

Yes. The hourly charge applies regardless of traffic, subnet association, or public IP attachment. Delete unused gateways after verifying dependencies.

Are Azure bandwidth and public IP charges included in NAT Gateway pricing?

No. Internet egress, cross-region transfer, and public IP or prefix charges are billed separately. Public IPs also remain after you delete the gateway.

How can I reduce Azure NAT Gateway costs?

Analyze traffic, delete idle gateways, and cut unnecessary external transfers. Consider service endpoints, Private Link, and caching, then monitor continuously in Cost Management.